The project included six major work items, the following described six parts results of the work. First, the analysis of Hazardous Industrial Waste and the Record Management Regulations were examined. The amendments of the“Hazardous Industrial Waste Record and Analysis Management Regulations (draft)” were also proposed. The amendment focuses on adjusting frequency of determination, and regulating the derived wastes after reuse which must be determined. Second, the types of industrial waste in the large incinerators were investigated. The physical and chemical characteristics of the eight waste samples were sampled and analyzed during the investigation. There were six items with flammable between 88 and 98% and their lower calorific value on wet basis were in the range of 4800 ~ 6900 Cal/kg. Moreover, the reuse of the industrial wastes as fuels were evaluated and its regulation and management were then proposed. Third, completed the project planned dioxin tracking investigations for five years( second year), including twenty sampling and analysis works, creating dioxin fingerprints data for 4 industries. Fourth, reviewed the fiber reinforced plastics (FRP) disposal and reuse situations, and synthesized the treatment and reuse method. Five, the cleanup and recycling status of industrial waste that difficult to cleanup, including furnace slag, dust, sludge, and waste solvent were investigated per quarter, by tracking the waste of three steel industries, this project has supported the management proposal. In addition, the quarterly inspection of four Environmental Science and Technology Parks was finished. Their operational data were also collected and organized.

Industrial waste, Refuse Derived Fuel,RDF, Dioxin, Industrial sludge, Electric Arc Furnace Slag, Waste solvent, Hazardous industrial waste, Fiber Reinforced Plastics